• Signal transmission via four strand multimode LC fiber optic cable — no RF interference.
• Four models available; each model supports a different resolution up to 4,950 feet (1,500 meters).
  • 1024x768 at a maximum refresh rate of 120Hz.
  • 1280x1024 at a maximum refresh rate of 100Hz.
  • 1600x1200 at a maximum refresh rate of 75Hz.
  • 1920x1200 at a maximum refresh rate of 60Hz.
  • The extenders will support monitors with a lower resolution.

• Small form factor — allowing for easy connection and placement.
• Cables can be installed in conduit prior to extender installation.
• No software to install.
• RGB and Clock signals are transmitted separately by multimode optical fiber.

• Remote DVI display monitoring for medical, military, aerospace, industrial and traffic control applications.
• Digital Flat Panel Displays (FPD), Plasma Display Panels (PDP) and projectors in conference rooms and auditoriums.
• Kiosks with digital FPDs.
• Color LED signboards, FPDs and PDPs for information display at stadiums.

• Resolution: maximum up to 1920x1200 at distances up to 1,500 meters (4,900 ft).
  • Refer to chart below for maximum resolution for each extender.
• Connectors (for transmitter and receiver): One male DVI-D single link connector and two duplex LC connectors.
• Optical source: 850nm VCSEL.
• PIN photo diode optical receiver.
• Compliant with DDWG DVI standard.

Environmental

• Operating Temperature: -32°F to 122°F (-0°C to 50°C).
• Storage Temperature: -40°F to 185°F (-40°C to 85°C).

Regulatory Approvals

• CE, FCC, RoHS.

Dimensions

• WxDxH (in): 1.5x2.8x0.7

Cables

• Use a FIBER-2D-LCLC-50-xxM (2 duplex LC 50-micron) multimode fiber optic cable to extend the receiver for the transmitter up to 4,950 feet (not included).

Power

• 110 to 220 VAC at 50 or 60 Hz via AC adapter.

MTBF

• 100,000 hrs

Warranty

• Two years