Features and Benefits

With support for multiple network devices and remote management, the Avocent DSR1022 KVM over IP switch gives you greater access to branch office devices.

The DSR1022 switch is specifically designed for you to easily troubleshoot, reboot or even power cycle servers or serial devices in branch offices, avoiding the need for costly on-site service calls. The DSR1022 switch includes four configurable ports for maximum flexibility and supports PS/2 and USB servers. External modem support is available if your network is down. Managed with Avocent DSView®3 software, this solution combines SNMP, IPMI support, and BIOS-level control of your branch office's servers, routers and DSUs. Hub and spoke failover capability allows users to authenticate when a primary server is unavailable

• 4-port Digital KVM over IP Switch
• Compact, KVM over IP appliance integrates KVM, an external modem and power control in one solution
• Provides access to an unlimited number of servers or serial devices, no matter their location
• Includes four configurable ports for maximum flexibility when connecting to servers or serial devices
• Offers IT administrators the ability to dial into a remotely located server or serial device
• Remotely reboot the server to the BIOS level or even power cycle remote devices --- all from a single DSView 3 software interface
• Uses the same management interface for the data center and the branch offices
• Designed for multi-platform servers, including PS/2, Sun and USB
• DSView 3 software advanced security includes audit logs and the ability to assign individual user rights
• On-board Web browser support allows direct access to target devices without additional software, a benefit for small companies who want a scalable system that can easily grow with them. DSView 3 management software can be added later as the system grows.

Specifications
Mechanical	Height	1.72 in. (4.37 cm)
	Width	17.00 in. (43.18 cm)
	Depth	8.08 in. (20.51 cm)
	Weight	5.3 lbs. (2.40 kg) without cables
Environmental	Operating Temp	32 to 104°F (0 to 40°C)
	Storage Temp	-4 to 158°F (-20 to 70°C)
Power	Operating Voltage	100 - 240 VAC
	Power Frequency	50 - 60 Hz autosensing
	Input	25 W maximum
Supported Hardware	Computers	PS/2, Sun, USB
	Monitors	VGA, SVGA (XGA, XGA-II with adaptor), Maximum Local Port: 1600 x 1280, Maximum Remote Port using a DSRIQ module: 1280 x 1024 @ 75 Hz
	Peripherals	USB keyboard and mouse, PS/2 keyboard, PS/2 mouse, IntelliMouse
Standards	Approved Agency	UL, FCC, cUL, ICES-003, CE, GS, VCCI, MIC, C-Tick, GOST