| | | |
| General Information: |
The VS82 video splitter is not a "Y" connection in a box, but rather an active device performing two functions: (1) it reproduces a video signal from a single source into multiple outputs, and (2) it boosts the signal so it can be transmitted over longer distances without signal degradation. Comparing the input signal to the out put signal with advanced video signal test equipment, ATEN's VS82 exhibits excellent performance characteristics on DC offset and white level tests. These results provide measurable proof that the VS82 represents the truest color reproduction possible from original signal input to multi signal outputs.
|
| Technical Information: |
| Number of Computers |
1 |
| Number of Monitors |
2 |
| Graphics Modes |
VGA
XGA
SVGA
UXGA |
| Graphics Resolution |
1600 x 1200 @ 60Hz |
| Video Bandwidth |
190MHz -3dB |
| Operating Range |
210 ft |
| Interfaces/Ports: |
| Interfaces/Ports |
1 x 15-pin D-Sub (HD-15) Computer
2 x 15-pin D-Sub (HD-15) Monitor |
| Controls/Indicators: |
| Status Indicators |
1 x Power |
| Power Description: |
| Input Voltage |
9 V DC |
| Power Consumption |
1.35W Maximum |
| Environmental Conditions: |
| Temperature |
32 °F (0 °C) to 122 °F (50 °C) Operating
-4 °F (-20 °C) to 140 °F (60 °C) Storage |
| Humidity |
0 to 80% Non-condensing Relative Humidity |
| Physical Characteristics: |
| Weight |
1.4 lb |
| Miscellaneous: |
| Package Contents |
VS82 2-port VGA Video Splitter
1 x VGA cable (6 ft.)
1 x Power adapter
2 x Screw |
| | |
|
| |
