| | | |
| Description: |
The SXP-500 allows Centronics and RS-232 devices to communicate with each other via serial to parallel or parallel to serial conversion. Simple DIP Switch settings establish the flow direction, serial transfer parameters, etc. The serial baud rate can be set up to support both hardware and software (XON/XOFF) handshaking. The SXP-500 provides a DB-9 RS-232C (DCE) compatible connector attached to cable at one end, and a C-36 Centronics connector integrated on the unit body. This design allows the serial and parallel devices to be connected directly (provided they are located close enough to each other), without the need for additional cables.
|
| Specifications: |
| Product Description: |
ATEN SXP 500 - parallel/serial adapter |
| Device Type: |
Parallel/serial adapter |
| Form Factor: |
External |
| Interface (Bus) Type: |
Parallel / serial |
| Dimensions (WxDxH): |
2.4 in x 4 in x 1 in |
| Weight: |
0.2 lbs |
| Cabling Type: |
Parallel, serial |
| Data Transfer Rate: |
921.6 Kbps |
| General Information: |
DIP switch sets data direction
|
| Technical Information: |
| Cable Length |
16.4ft |
| Number of Connectors |
2 |
| Connector Details |
1 x 9-pin DB-9 Female RS-232
1 x 36-pin Centronics Male IEEE 1284 |
| Data Transfer Rate |
921.6Kbps |
| Material |
Plastic |
| Platform Support |
PC
Mac |
| Power Description: |
| Input Voltage |
9 V AC |
| Power Consumption |
8.55mW Maximum |
| Physical Characteristics: |
| Dimensions |
1" Height x 2.44" Width x 3.97" Depth |
| Shipping Dimensions |
2" Height x 5" Width x 5" Depth |
| Weight |
0.26 lb |
| Shipping Weight |
0.5 lb |
| Miscellaneous: |
| Additional Information |
Compact Size
Both Hardware and Software (XON/XOFF) Handshaking
Non Powered
Easy Installation |
| | |
|
| |
