Features:

• Remote and local power on/off/reboot control for eight outlets via TCP/IP and a built in RS-232 PON (Power over the Net) port
• Daisy chain up to 15 additional stations to control up to 128 outlets
• Local / manual switching (with user restricted access) for each port via front panel push button switches
• Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
• Easy setup and operation via a GUI interface
• Provides three configuration/management methods: Browser; Telnet; or Console Terminal
• Safe shutdown and rebooting for Windows systems*
• Over current protection and recovery for each AC port (110 V model only); total port over current protection (both models) - the current status can be monitored via the GUI interface locally or remotely.
• Independent circuits for unit power and device power - the PN0108 can be accessed if an over current condition trips the device side circuit breaker
• On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times
• Port grouping - perform the same action on a specified group of ports
• Two level (Administrator and User) security
• Firmware upgradeable - daisy chained stations receive the upgrade via the daisy chain bus

Requirements:

Browsers accessing the PN0108 must support SSL 128 bit encryption. For the Java access, you must have Java J2RE (1.4 or higher) installed on your computer. Java is available for free download from the Sun Java website: http://java.sun.com For cold booting of attached computers, the computer's BIOS must support this feature. For Safe Shutdown:1)The computer must be running Windows (Windows 98 or higher). 2)The computer's BIOS must support Safe Shutdown. 3)There must be an available COM port on the computer for the Safe Shutdown cable to plug into. Compatibility with other ATEN/Altusen products: PN0108 connect to PN9108 using PN9108's web Browser or Terminal(Text mode) to control; PN0108 connect to KN9116/CN-5000/CN-6000/Computer using PON Java client to control; PN0108 connect to SN series/ Computer using Terminal(text mode) to control.

Package Content:

1 PN0108 Station 1 AC Source Power Cord 8 Power Outlet Power Cords 8 Safe Shutdown Cables 1 PON Cable (DB9 F to DB9 M) 1 User Manual 1 Quick start guide 1 Mounting Kit :Rack mounting brackets and hardware 4 foot pads 1 Software CD 1 Warranty registration card

Specification :

Power Output Rating Total AC Power Outlet, 50/60Hz 100~120V@11A(max) or 220~240V@9A(max) Power Supply   16 watts when no load Master Carton Width 15.3 in. (38.8 cm) Height 13.7 in. (34.8 cm) Master Carton Qty. 3 Depth 25.4 in. (64.5 cm) Power Input Rating Per AC Power Inlet, 50/60Hz 100~120V@ 12A (max) or 220~240V@10A(max) Switches Reset 1 x semi-hidden Power 1 xrocker switch Connectors AC Power Inlets 1 xIEC 60320/C14 (male) AC Power Outlets 8 xIEC 60320/C13 ( female) Package Dimensions Height 12.8 in. (32.4 cm) Depth 24.8 in. (63.0 cm) Width 4.7 in. (12.0 cm) LEDs On Line 8 x green @front Power On 1 x blue @ front AC Power Outlet 8 (orange) Station ID 2 x 7 segment (yellow) Housing case Metal Weight Unit Pack Wt. 15.5 lb. (7.1 kg) Master Carton Wt. 49.5 lb. (22.5 Kg) Dimensions Height 1.7 in. (4.4 cm) width 8.3 in. (21.0 cm) Depth 17.0 in. (43.2 cm) Operating Temperature   32~ 104 F (0-40 C) Storage Temperature   -4~ 140 F (-20~ +60 C) Daisy Chain   In 1 x DB-9(F), Out 1 x DB-9 (M) Power Consumption   120V; 60Hz; 1800W, 230V; 50Hz; 2300W (Full Load) Output Connector   8 x IEC 60320/C13 (F) Humidity   0 - 80% RH Input Connector   1 x IEC 60320/C14 (M)