| General Information: |
The Maxiport 16-port KVM Kit allows you to access and control up to 512 computers from a single keyboard/monitor/mouse console. It also comes with many great features such as Hot key control, On Screen Display (OSD), keyboard and mouse emulation, and Flash ROM for firmware upgrade.
|
| Technical Information: |
| Number of Computers |
16 |
| Number of Users |
1 x Local User |
| Video Signals |
VGA
SVGA
MultiSync |
| Graphics Resolution |
1920 x 1440 Maximum |
| Scan Intervals |
User Specified: 1 - 255 Seconds |
| Security Features |
Two level password security - Only authorized users view and control the computers - Up to four users plus an administrator - Separate profiles for each |
| Operating Range |
6ft to 10ft |
| Cable Length |
8 x 6ft KVM Cable Included
8 x 10ft KVM Cable Included |
| Interfaces/Ports: |
| User/Console Ports |
1 x 6-pin mini-DIN (PS/2) Female Keyboard
1 x 6-pin mini-DIN (PS/2) Female Mouse
1 x 15-pin HD-15 Female VGA/SVGA |
| Computer Ports |
16 x 15-pin HD-15 |
| Other Ports |
1 x 25-pin DB-25 Female Daisy-chain
1 x 25-pin DB-25 Male Daisy-chain
1 x RJ-11 Flash-upgrade |
| Power Description: |
| Input Voltage |
9 V DC |
| Power Consumption |
8 W Maximum |
| Environmental Conditions: |
| Humidity |
0 to 80% Relative Humidity |
| Physical Characteristics: |
| Form Factor |
1U 19" Rack-mountable |
| Dimensions |
1.75" Height x 17" Width x 6.2" Depth |
| Shipping Dimensions |
4.5" Height x 9.25" Width x 21.75" Depth |
| Weight |
6 lb |
| Shipping Weight |
9.5 lb |
| Miscellaneous: |
| Package Contents |
1 x ACS1216A KVM Switch
8 x 6ft KVM cables (2L5202P)
8 x 10ft KVM cable (2L5203P)
1 x firmware upgrade cable
1 x power adapter
1 x rack mounting kit
1 x user manual |
| Additional Information |
Daisy chain up to 31 additional units - Control up to 512 computers from a single console
Auto-sensing of station position on daisy chained installations - No need for manual DIP switch setting - Front panel LED indicates station position
Port names automatically reconfigured when station sequence is changed
No software required - Convenient computer selection via intuitive on Screen Display (OSD) menus
AutoScan feature for monitoring user-selected computers
Hot pluggable - Add or remove computers without having to power down the switch
PS/2 keyboard and mouse emulation - Computers boot even when the console focus is elsewhere |
| System Requirements |
Console:
A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation
A PS/2 mouse
A PS/2 keyboard
Computer:
A VGA, SVGA or Multisync card
A 6-pin mini DIN (PS/2) port
Either a 6-pin mini DIN (PS/2) keyboard port, or a 5-pin DIN (AT) keyboard port |
| Compatibility |
Supports PS/2 compatible mice, Microsoft Intellimouse Explorer, Logitech FirstMouse+ |
| |
